What to Do If Touchpad is Not Working Windows 11

We may earn money or products from the companies mentioned in this post.

If touchpad is not working in Windows 11, try updating your touchpad drivers first. If that doesn’t work, check for Windows updates and run the Troubleshooter to fix any potential issues.

Encountering touchpad issues in Windows 11 can be frustrating, but there are simple solutions to resolve them. A malfunctioning touchpad can hinder your productivity and cause inconvenience, so it’s crucial to address the problem promptly. By following some troubleshooting steps, you can potentially resolve the issue and restore the functionality of your touchpad.

This article will guide you through the necessary steps to troubleshoot and fix a non-working touchpad on a Windows 11 system, allowing you to regain control and efficiency in your daily computer usage.

Check Touchpad Settings

If you are experiencing issues with your touchpad not working on Windows 11, the first step is to check the touchpad settings. Here are a few essential settings you should ensure are correctly configured.

Make Sure Touchpad Is Enabled

In some cases, the touchpad may be accidentally disabled. To verify if this is the issue, follow these steps:

1. Open the Start menu by clicking on the Windows icon in the bottom left corner of the screen.
2. Go to “Settings” by clicking on the gear icon.
3. Within the settings menu, select “Devices.”
4. Click on “Touchpad” in the left-hand menu.
5. Ensure the toggle switch under “Touchpad” is turned on. If not, click on the switch to enable it.

By making sure the touchpad is enabled, you can eliminate this common issue as a potential cause of the problem.

Adjust Touchpad Sensitivity

If the touchpad is enabled but still not working as expected, you may need to adjust its sensitivity. Here’s how:

1. Open the Start menu and click on the gear icon to access the Settings menu.
2. Select “Devices” within the settings menu.
3. Click on “Touchpad” in the left-hand menu.
4. Beneath the “Touchpad sensitivity” section, you’ll find a slider with options ranging from “Low sensitivity” to “High sensitivity.”
5. Experiment with the sensitivity by moving the slider left or right until you find a setting that works best for you.

Adjusting the touchpad sensitivity can help enhance your overall user experience and resolve any issues caused by incorrect settings.

Note: If the touchpad problem persists even after checking and adjusting the settings, it is recommended to update the touchpad drivers or seek further assistance from the manufacturer’s support team.

Update Touchpad Drivers

If your touchpad is not working on Windows 11, one of the possible solutions is to update the touchpad drivers. Outdated or incompatible drivers can often cause issues with your touchpad functionality. In this article, we’ll guide you through the steps to check for driver updates and install the latest drivers to get your touchpad working again.

Check For Driver Updates

Before going ahead with installing new drivers, it’s essential to check if there are any updates available for your touchpad drivers. Here’s how you can do it:

1. Go to the Start menu and type “Device Manager.” Open the Device Manager from the search results.
2. In the Device Manager window, locate the “Mice and other pointing devices” category.
3. Expand the category by clicking on the arrow next to it.
4. Find your touchpad device within the expanded list. It is usually named something like “HID-compliant mouse” or “PS/2 Compatible Mouse.”
5. Right-click on the touchpad device and select “Update driver” from the context menu.
6. Choose the option “Search automatically for updated driver software.”

This will prompt Windows to search for the latest driver updates for your touchpad device. If any updates are found, Windows will automatically download and install them. Keep in mind that this process may take some time, so be patient.

Install The Latest Drivers

If Windows doesn’t find any updates or if the touchpad still doesn’t work after the update, you can manually install the latest drivers. Here’s how:

1. Visit the website of your touchpad’s manufacturer.
2. Look for the “Support” or “Downloads” section on the website.
3. Enter the model number or name of your touchpad in the search bar.
4. Find the latest driver for your touchpad compatible with Windows 11.
5. Download the driver file to your computer.
6. Once the download is complete, double-click on the driver file to run the installation.
7. Follow the on-screen instructions to complete the installation process.

After the installation is finished, restart your computer. This should update your touchpad drivers and potentially resolve any issues causing it to not work.

In conclusion, updating the touchpad drivers can often fix problems related to the touchpad not working on Windows 11. Checking for driver updates and installing the latest drivers are simple yet effective steps to troubleshoot and resolve touchpad issues. Make sure to follow the instructions carefully and restart your computer after the installation to ensure the changes take effect.

Restart Your Computer

If your touchpad is not working in Windows 11, restarting your computer can often resolve the issue. It’s a simple yet effective troubleshooting step that can help reset the system and potentially fix any temporary glitches causing the touchpad malfunction.

Perform A Full Restart

To perform a full restart on your Windows 11 system, follow these steps:

1. Click on the Start menu icon in the taskbar.
2. Select the Power icon.
3. Choose Restart from the options.
4. Wait for the system to shut down and restart.

Reset The Touchpad

If a full restart doesn’t resolve the touchpad issue, you can try resetting the touchpad using the following steps:

1. Go to Settings by pressing Windows + I.
2. Click on Devices, then Touchpad.
3. Scroll down and click on Reset to reset the touchpad settings to their default state.

Run Troubleshooters

If your touchpad is not working on Windows 11, running troubleshooters can help identify and fix the issue. Here’s how to use the built-in troubleshooters and run the hardware troubleshooter to resolve touchpad problems.

Use Built-in Troubleshooter

To start the built-in troubleshooter on Windows 11, follow these steps:

1. Click on the Start button and select Settings.
2. In the Settings window, click on System.
3. Next, select Troubleshoot from the left-hand menu.
4. Under the Find and fix other problems section, click on Run next to the Hardware and Devices troubleshooter.

Run Hardware Troubleshooter

If the built-in troubleshooter doesn’t resolve the issue, you can run the hardware troubleshooter by following these steps:

1. Click on the Start button and select Settings.
2. In the Settings window, click on System.
3. Select Display from the left-hand menu.
4. Scroll down and click on the Advanced display settings.
5. Then, click on Display adapter properties.
6. In the new window, go to the Hardware tab and click on Properties.
7. Click on the Change settings button, followed by Driver, and then select Update driver.
8. Follow the on-screen instructions to complete the update process.

Use External Mouse As A Temporary Solution

If your touchpad is not working on Windows 11, a temporary solution is to use an external mouse. Simply connect the mouse to your laptop or desktop and navigate through your device with ease. It’s a quick fix that allows you to continue using your device until the touchpad issue is resolved.

Connect An External Mouse

If your touchpad is not working in Windows 11, you can easily solve the problem temporarily by connecting an external mouse. Using an external mouse allows you to navigate through your computer and perform various tasks without relying on the touchpad. Here’s how you can connect an external mouse to your Windows 11 system:

1. Start by ensuring that your computer has a USB port.
2. Locate the USB receiver that comes with your external mouse.
3. Insert the USB receiver into the USB port of your computer.
4. Wait for the computer to recognize the external mouse.
5. Your external mouse is now ready to use.

Using an external mouse can be a quick and effective solution when your touchpad is not working. It allows you to seamlessly continue your work without interruptions.

Disable Touchpad

Another option you have to temporarily resolve the touchpad issue in Windows 11 is to disable the touchpad. Disabling the touchpad ensures that it does not interfere with your external mouse and prevents any accidental clicks. Here’s a step-by-step guide on how to disable the touchpad:

1. Press the “Windows” key on your keyboard to open the Start menu.
2. Type “Settings” and open the Settings app.
3. In the Settings app, select the “Devices” option.
4. In the left-hand menu, click on “Touchpad”.
5. Toggle the switch under “Touchpad” to the off position.

Disabling the touchpad provides a temporary solution to the problem, allowing you to use your computer without any touchpad-related issues. Remember to re-enable the touchpad when the issue is resolved. Using an external mouse and disabling the touchpad are effective ways to overcome the problem of a non-functional touchpad in Windows 11. Implementing these solutions ensures that you can continue using your computer seamlessly until a permanent fix is found.

Conclusion

To sum up, experiencing issues with the touchpad on Windows 11 can be frustrating, but there are several troubleshooting steps you can take to resolve the problem. By following the methods discussed in this blog, such as updating drivers, checking for hardware issues, and adjusting settings, you can try to get your touchpad working again.

Remember to reach out to the manufacturer or seek professional assistance if needed. With a bit of patience and troubleshooting, you’ll be able to navigate your Windows 11 device without any touchpad problems.